Product name Spray dryer (spray dryer)
Model SD-1010
Product code No. 275170
Type Two-fluid nozzle method
Performance Water evaporation Max.about 1500 mL
Temperature control range / accuracy 40-200 ° C
Hot air volume adjustment range 0.2 to 0.75 m 3 / min
Spray air pressure adjustment range 20 to 250 kPa (0.2 to 2.5 kg / cm 2 )
Liquid pump flow range 150-1700 mL
Stock solution stirring rotation speed / capacity 100-1000 rpm ・ 50 mL ~ 2 L water
Function Safety function Evaporator protection cover, microcomputer self-diagnosis function
(Temperature abnormality, air volume abnormality, heater disconnection, liquid supply pressure abnormality
Spray air line cleaning function Automatic operation by interval timer
Attached functions Spray air line valve ON-OFF switch
External output 0 to 10 mV (inlet temperature, outlet temperature, dry air flow rate)
Constitution heater 3 kW
Feed pump Tube pump
Spray nozzle Two-fluid nozzle (nozzle hole diameter 0.71 mm)
Spray air pump Spray air compressor (sold separately)
Evaporation tube Hard glass
Cyclone part Hard glass
Powder collection container Hard glass (capacity 600mL)
Stock solution stirring DC brushless servo output 6 W, cobalt magnet
Suction blower Commutator blower, Max.0.75 m 3 / min, variable flow rate type
Standard Use tube diameter 3.15 mm inner diameter x 5.2 mm outer diameter
Air connection diameter for atomization 4 mm inner diameter x 6 mm outer diameter union for flexible urethane tubes
Spray air pressure Pressure 294 kPa (3 kg / cm 2 ), flow rate 25 L / min or more
Exhaust port size Exhaust port outer diameter 50 mm
Interval timer OFF or 1 to 20 minutes (automatic interval time)
Ambient temperature range 5-35 ° C
Outer dimensions (mm) / mass 700 width x 620 depth x 1500 height, about 110 kg
Power input and rated power 21 A, 4.2 kVA, 200 VAC single phase, 50/60 Hz

* Performance values are at room temperature of 20 ° C, rated power supply voltage of 50Hz, using fresh water and silicon tubes.
* Fares are required.
* Inspection costs (delivery, installation, assembly, etc.) are required. I will quote separately.
* Power plug is not included.
Accessories Silicon tube inside diameter 3.15 mm × outside diameter 5.2 mm × length 2 m
Silicon tube inside diameter 3.7 mm × outside diameter 6.1 mm × length 1 m
Exhaust hose 2.5 m Record output code 3
Air piping tube inside diameter 4 ㎜ X Outer diameter 6 mm x Length 5m
Air piping connector (1 / 4B) stirrer